TC2-AMP2 2 x 20w Digital Amplifier

Snapshot

> Extremely small 2 x 20w (RMS) at 8 ohms Digital Amplifier
> 2 x Stereo inputs (Input 1 is duplicated on front and rear)
> IR Remote control included

One-Minute Product Profile

Details

By using latest low-impedance digital amplifier chip technology the new Techconnect Amp² module outputs a massive 2 x 20w RMS (at 8 ohms) but fits into the space of a Techconnect module.

Quick-Access Input
Two Inputs are wired into the rear with removable phoenix connectors, however a new feature of this amplifier is that Input 1 is duplicated on the front panel with a minijack socket for convenience. This half-normalled input disconnects the rear terminal while in use.

Green D-Class Amplifier
Digital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary… but don’t let size deceive you: the Techconnect Amp² can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers).

LED Display
A clear display makes the product easy to use and a simple soft-control interface gives instant access to controls. Because the control panel can be installed anywhere in the room it is more convenient than traditional powered speakers where access to the controls can be awkward.

Remote Control Included
IR receivers are positioned on the front for normal use and on the rear for integration with a control system such as the Techconnect Control².

Easy to Install and Uninstall
We have paid special attention to creating a robust product that is simple and easy to install; the inputs and outputs are all via removable phoenix connectors which allow non-technical end users to uninstall it very easily if required. Short input cables are included for connection to the rear of adjacent input modules on the Techconnect.

Wall Mounted and Secure
Ideal when you don’t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. It is close at hand if volume adjustments need to be made, making it perfect for training rooms, boardrooms, and classrooms.

Integrated Techconnect Family
Included is a single-gang backbox and surround, or alternately you can mount the amplifier module in a double-gang surround with other Techconnect modules. You could even mount this module into a Techconnect Tilt in the table.

Laptop-style power supply

A 3m DC tail which can be shortened means easy routing of power cable through trunking. Velcro is included for fixing the power supply in place, or a blank surround is available to hide it in a standard
double-gang UK backbox.

Product PDF
Manual
CE Certificate
CB Certificate
NRTL Certificate

Specifications

AMPLIFIER DIMENSIONS: 42 x 71 x 40mm

CARTON DIMENSIONS: 230 x 100 x 63mm

AMPLIFIER WEIGHT: 63 grams

PACKAGED WEIGHT: 1.1kg

COLOUR: White

INPUTS: 2 x Stereo inputs via removable phoenix connectors

TECHNICAL DETAILS:
2 x 20w @ 8 ohms
Total Harmonic Distortion: less than or equal to 1% (20Hz~22kHz)
Frequency response (line in): 80Hz~22kHz(±2dB)
Signal to noise ratio (line in): more than or equal to 98dB (A-weighted)
Rating input level/impedance: Line in 500mV/50k
Power Supply 100-240vAC 50/60Hz, Max 1A, DC Output 12V 4A, DC Cable 3m
Power consumption (rating condition): less than or equal to 40W

ACCESSORIES INCLUDED:
1 x Single-gang Backbox
1 x Single-gang Surround
2 x 150mm input cables
2 x Unshielded Speaker cable 5m long
1 x Euro Figure-8 Power cable 2m long
1 x UK Figure-8 Power cable 2m long

POWER SUPPLY: 100/230V External Laptop-style Power Supply

WARRANTY: 2-year return to base

COMPLIANCES RoHS, WEEE & CE compliant

ORDER PART CODE: TC2-AMP2 [SAP:1872510]
or TC2-AMP2 +SP-1300B bundle [SAP:1703068]
or TC2-AMP2+SP-1300W bundle [SAP: 1703069]
or TC2-AMP2 +CS-1300 bundle [SAP: 1703070]